Advanced Tandem Mass Spectrometric Analysis of Complex Mixtures of Triacylglycerol Regioisomers: A Case Study of Bovine Milk Fat.

Comprehensive analysis of triacylglycerol (TAG) regioisomers is extremely challenging, with many variables that can influence the results. Previously, we reported a novel algorithmic method for resolving regioisomers of complex mixtures of TAGs. In the current study, the TAG Analyzer software and its mass spectrometric fragmentation model were further developed and validated for a much wider range of TAGs. To demonstrate the method, we performed for the first time a comprehensive analysis of TAG regioisomers of bovine milk fat, a very important and one of the most complex TAG mixtures in nature containing FAs ranging from short to long carbon chains. This analysis method forms a solid basis for further investigation of TAG regioisomer profiles in various natural fats and oils, potentially aiding in the development of new and healthier foods and nutraceuticals with targeted lipid structures.

Enzymatic Preparation, In-Depth Molecular Analysis, and In Vitro Digestion Simulation of Palmitoleic Acid (ω-7)-Enriched Fish Oil Triacylglycerols.

In this study, an enzymatic reaction was developed for synthesizing pure triacylglycerols (TAG) with a high content of palmitoleic acid (POA) using fish byproduct oil. The characteristics of synthesized structural TAGs rich in POA (POA-TAG) were analyzed in detail through ultrahigh-performance liquid chromatography Q Exactive orbitrap mass spectrometry. Optimal conditions were thoroughly investigated and determined for reaction systems, including the use of Lipozyme TL IM and Novozym 435, 15 wt % lipase loading, substrate mass ratio of 1:3, and water content of 2.5 and 0.5 wt %, respectively, resulting in yields of 67.50 and 67.45% for POA-TAG, respectively. Multivariate statistical analysis revealed that TAG 16:1/16:1/20:4, TAG 16:1/16:1/16:1, TAG 16:1/16:1/18:1, and TAG 16:0/16:1/18:1 were the main variables in Lipozyme TL IM and Novozym 435 enzyme-catalyzed products under different water content conditions. Finally, the fate of POA-TAG across the gastrointestinal tract was simulated using an in vitro digestion model. The results showed that the maximum release of free fatty acids and apparent rate constants were 71.44% and 0.0347 s-1, respectively, for POA-TAG lipids, and the physical and structural characteristics during digestion depended on their microenvironments. These findings provide a theoretical basis for studying the rational design of POA-structural lipids and exploring the nutritional and functional benefits of POA products.

Pickering emulsion emulsified using novel cellulose nanofibers significantly lowers the lipid release rate and cellular absorption.

A Pickering emulsion is an emulsion system stabilized by solid particles and represents a promising candidate for emulsifying lipids. Cellulose nanofibers (CNFs) have excellent ability to control the lipid release rate. This study aims to find the optimal formulation for a nanocellulose-stabilized Pickering emulsion that is the most effective in reducing the lipid release rate. The Pickering emulsion was prepared by homogenizing pretreated nanocellulose with medium-chain triglycerides using high-speed and ultrasonic homogenizers. The results show that the Pickering emulsion with 0.709% nanocellulose and 30.6% medium-chain fatty acid content yielded an average particle size of approximately 2.5 µm, which is the most stable and effective in reducing the amount of the lipids released. The nanocellulose Pickering emulsion formulation developed in this study forms a significant foundation for future research and applications regarding the use of nanotechnology and Pickering emulsions to maintain the balance between one's health and the desirable flavor of fat.

Characterization of Palm Fatty Acid Distillate, Diacylglycerol Regioisomers, and Esterification Products Using High-Performance Size Exclusion Chromatography.

High-performance size exclusion chromatography (HPSEC) equipped with an evaporative light scattering detector (ELSD) was utilized for characterization of palm fatty acid distillate (PFAD) and its esterified products, with a particular focus on lipid profiles and diacylglycerol (DAG) regioisomers. The separation of triacylglycerol (TAG), DAG, monoacylglycerol (MAG), and free fatty acid (FFA) was achieved through a single 100-Å Phenogel column, coupled with a 2-cm C18 guard, utilizing toluene/acetic acid (100:0.25, v/v) as the mobile phase. This separation was based on size sieving principles and the interactions between the hydroxyl group(s) and the Phenogel matrix. The limit of detection (LOD) and limit of quantification (LOQ) for the esterified PFAD products analyzed by this method fell within the range of 4.8-5.5 µg/mL and 14.7-16.7 µg/mL, respectively. Additionally, the same column, paired with a 2-cm silica guard and a mobile phase comprised of toluene/isooctane/acetic acid (35:65:0.15, v/v/v), was used for the characterization of DAG regioisomers within the esterified PFAD. LODs and LOQs for sn-1,3-DAG and sn- 1,2-DAG were determined to be 39.2 and 118.7 µg/mL, and 32.8 and 99.5 µg/mL, respectively. Investigation of esterified PFAD products prepared using 4% H2SO4 at 120°C. After 2 h, the analysis revealed the highest MAG content at 31.85%, accompanied by 51.54% DAG, 2.35% TAG, and a residual 14.27% FFA. Notably, as the reaction time extended, the MAG content decreased, while both DAG and TAG levels exhibited an increasing trend. Further examination of DAG regioisomers during PFAD esterification, under varying catalyst concentrations (2-10%) and reaction temperatures (80-140°C), demonstrated a significant increase in the percentage of sn-1,3-DAG, inversely correlated with the reduction in FFA from 2% H 2 SO 4 and 80°C onwards. Remarkably, the percentage of sn-1,2-DAG remained relatively stable regardless of changes in catalyst concentrations or temperatures, confirming its susceptibility to isomerization into the thermodynamically more stable sn-1,3-DAG form. This study provides valuable insights into the composition and behavior of esterified PFAD products.

The triacylglycerol structures are key factors influencing lipid digestion in preterm formulas during in vitro digestion.

Preterm formulas are usually supplemented with medium-chain triacylglycerols (MCT) whereas breast milk contains more medium and long-chain triacylglycerols (MLCT). Different types of triacylglycerol (TAG) containing medium-chain fatty acids may influence lipid digestion. In this study, the digestive characteristics of breast milk and preterm formulas with different MCT contents were evaluated using a dynamic in vitro system simulating the gastrointestinal tract of preterm infants. The lipolysis products, including diacylglycerols, monoacylglycerols (MAGs), free fatty acids, and undigested TAGs, were analyzed. Formulas with MCT addition has significantly (P < 0.05) lower lipolysis degree (LD, 69.35%-71.28%) than breast milk (76.93%). Higher amounts of C8:0 and C10:0 were released in the formulas with MCT addition. Breast milk released more C18:1n-9, C18:2n-6, and MAG containing C16:0, whereas formulas released more free C16:0. The Pearson correlation heatmap showed that the LD value was significantly and positively (P < 0.05) related to the MLCT and sn-2 C16:0 content.

Interface chemistry affected the digestion fate of ketogenic diet based on medium- and long-chain triglycerides.

Ketogenic diet, characterized by high fat and low carbohydrate content, is gradually becoming a new perspective in the human diet; however, the mechanism of digestion of ketogenic diet remains unknown. In this study, we explored the oil-water interface to elucidate the digestion of a ketogenic diet based on typical representative medium- and long-chain triglycerides. The free fatty acids (FFAs) release indicated that glycerol trioctanoate with a shorter carbon chain (FFA = 920.55 ± 10.17 µmol) was significantly more digestible than glycerol tripalmitate (851.36 ± 9.48 µmol) and glycerol tristearate (805.81 ± 10.03 µmol). Particle size analysis revealed that the length of the carbon chain increased the size of triglycerides, resulting in a decreased contact area with lipase. The interfacial phenomenon indicated that the longer the carbon chain of triglycerides, the greater the reduction in binding capacity with salt ions in the digestive solution. Fluorescence spectroscopy analysis showed that the length of the carbon chain induced the displacement of the lipase peak, suggesting that the carbon chain length could alter the structure of lipase. Molecular dynamics simulation showed that the longer the carbon chain of triglycerides, the easier it was to loosen the structure of lipase. Bond energy analysis showed that the carbon chain length of triglycerides was positively correlated with the bond energy strength of the ester bonding. In conclusion, this study emphasizes that the ketogenic diet should primarily consist of shorter carbon chain triglycerides because carbon chain length can alter the digestion of triglycerides. This provides a new perspective on the quest for more effective ketogenic diet, in line with the current view of healthy diet.

Paternò-Büchi Reaction Mass Spectrometry Enables Positional Assignment of Polymethylene-Interrupted Double Bonds in Food-Derived Lipids.

Fatty acids (FAs) containing polymethylene-interrupted (PMI) double bonds are a component of human foods; however, they present a significant analytical challenge for de novo identification. Covalent adduct chemical ionization and ozone-induced dissociation mass spectrometry (MS) methods enable unambiguous assignment of PMI-FA double bond positions, however, no method has been reported with electrospray ionization (ESI) platform using off-the-shelf systems. In the current work, we studied the Paternò-Büchi (PB) fragmentation patterns of PMI-FA and triacylglycerol (TG) by analyzing several known food sources. PB-MS/MS and MS3 enabled complete double bond location assignments, including the isolated double bond in PMI-FA and triacylglycerols. Sea urchin ("uni"), oyster, pine nut, and ginkgo nut were characterized for their signature PMI-FA, 20:2(5Z,11Z), 22:2(7Z, 15Z), 18:3(5Z,9Z,12Z), and 20:3(5Z,11Z,14Z), respectively. Quantitative analyses of the relative abundance of these PMI-FA led to results similar to reference methods. 18:3(5Z,9Z,12Z) was enriched at the sn-1/sn-3 position in pine nut major TG.

Batch and continuous enzymatic interesterification of beef tallow: Interesterification degree, reaction relationship, and physicochemical properties.

The relationship between batch and continuous enzymatic interesterification was studied through enzymatic interesterification of beef tallow. The interesterification degree (ID) during the batch reaction was monitored based on triacylglycerol composition, sn-2 fatty acid composition, solid fat content, and melting profile and was described by an exponential model. A relationship equation featuring reaction parameters of the two reations was established to predict the ID and physicochemical characteristics in continuous interesterification. The prediction of the ID based on triacylglycerol composition was reliable, with an R2 value greater than 0.85. Interesterification produced more high-melting-point components for both reactions, but the acyl migration in the batch-stirring reactor was much greater, resulting in faster crystallization, a more delicate crystal network, and lower hardness. The relationship equation can be employed to predict the ID, but the prediction of physicochemical properties was constrained by the difference in acyl migration degree between the two reactions.

Identification of oxygenated triacylglycerols in pistachio nuts' lipids by reverse-phase high-resolution-liquid chromatography-ESI mass spectrometry.

Hydroxy- and peroxy-triacylglycerols are common products of lipid peroxidation formed during oil storage or heating or as enzymatic oxidation product of arachidonic acid as signaling molecules in mammals. In this study, oxygenated triacylglycerides (TAG) were identified in pistachio oil based on reverse phase(RP), high-performance liquid chromatography coupled with electrospray ionization and mass spectrometry (HPLC- ESI -MS). 20 novel lipid plant metabolites, classified based on their fragment spectra into a hydroxy (TAG-OH), an epoxy (TAG-O), and hydroperoxide (TAG-OOH) groups. We believe that this class of compounds has been for the first time observed as genuine secondary plant metabolites in a natural source in this case pistachio lipids of dietary relevance.

Palmitic acid at high concentration modifies the nanoscale structure of anhydrous milk fat.

We performed a nanoscale study based on X-ray scattering to understand the impact of a promotor of crystallization, palmitic acid (PA), at high concentration, on the networks of triacylglycerols (TAGs) in anhydrous milk fat (AMF). Melted blends containing 10 wt% PA were quenched at 25 °C. X-ray scattering data were compared with those obtained for pure AMF, pure PA, and AMF containing 1 wt% PA. While PA at low concentration did not modify the nanostructure of TAG crystals (direct crystallization in the ß'-2L form), a high concentration of this promotor favored the formation of polymorphic forms suggesting that PA first crystallizes and then directs crystallization of AMF TAGs towards α and ß forms.

Triglycerides Stabilize Water/Organic Interfaces of Changing Area via Conformational Flexibility.

The role of triglycerides (TGs) in both natural and synthetic biological membranes has long been the subject of study, involving metabolism, disease, and colloidal synthesis. TGs have been found to be critical components for successful liposomal encapsulation via a water/oil/water double emulsion, which this work endeavors to explain. TGs can occupy multiple positions in biological membranes. The glycerol backbone can reside at the water/organic interface, adjacent to phospholipid headgroups ("m" conformation), typically with relatively low (<3%) solubility. The glycerol backbone can also occupy hydrophobic regions, where it is isolated from water ("h" or "oil" conformation). This can occur in either midmembrane positions or phospholipid-coated lipid droplets (LDs). These conformations can be distinguished using 13C-nuclear magnetic resonance spectroscopy (NMR), which determines the degree of hydration of the TG backbone. Using this method, it was revealed that TGs transition from "m" to "h" conformation as the organic solvent is removed via evaporation. A new transitional TG backbone position has been identified with a level of hydration between "m" and "h". These results suggest that TGs can temporarily coat and stabilize the large water/organic interfaces present after emulsification. As the organic solvent is removed and interfaces shrink, the TGs recede into midmembrane spaces or bud off into LDs, which are confirmed via transmission electron microscopy (TEM) and can be removed via centrifugation. Encapsulation efficiency is found to be inversely related to both the saturation and length of the TG acyl chains, indicating that membrane fluidization is a key property arising from the presence of TGs. Beyond clarification of a mechanism for high-efficiency liposomal encapsulation, these results implicate TGs as components that are able to stabilize biological membrane transitions involving a changing interfacial area and curvature. This role for TGs may be of use in the formulation of drug delivery systems as well as in the investigation of membrane transitions in life sciences.

A synchrotron X-ray scattering study of the crystallization behavior of mixtures of confectionary triacylglycerides: Effect of chemical composition and shear on polymorphism and kinetics.

Cocoa butter equivalents (CBE) are mixtures of triglycerides from multiple sources (e.g., sunflower oil, mango kernel and sal), which resemble cocoa butter (CB) in both physical and chemical properties. Despite being widely used to replace CB in chocolate products, the crystallization behavior of many CBEs is still poorly understood. The aim of this work was to develop a fundamental understanding, at the molecular level, of the crystallization behavior of selected CBEs, and compare it with that of CB. Chromatography was used to determine the composition of CBEs, in terms of fatty acids and triacylglycerides (TAGs), while their thermodynamic behavior and crystallization kinetics were studied using polarized microscopy, differential calorimetry and three different synchrotron X-ray scattering setups. CBEs of different origin and chemical composition (e.g., different ratios of the main CB TAGs, namely POP, SOS and POS) crystallized in different polymorphs and with different kinetics of nucleation, growth and polymorphic transformation. SOS rich CBEs presented showed more polymorphs than CB and POP rich samples; whereas, CBEs with high concentration of POP showed slow kinetic of polymorphic transformation towards the stable ß(3L) form. Additionally, it was observed that the presence of small amounts (<1% w/w) of specific TAGs, such as OOO, PPP or SSS, could significantly affect the crystallization behavior of CBEs and CBs in terms of kinetics of polymorphic transformation and number of phases detected (multiple high melting ß(2L) polymorphs were identified in all samples studied). Finally, it was found that, regardless of the CBE composition, the presence of shear could promote the formation of stable ß polymorphs over metastable ß' and γ forms, and reduced the size of the crystal agglomerates formed due to increased secondary nucleation.

Thermophysical properties of blends composed of Amazonian fats and soybean oil.

Thermophysical properties of blends composed of soybean oil and fats obtained from fruits and seeds from Brazilian Amazonian region (Murumuru, Tucuma, and Bacuri) were investigated, looking for more sustainable alternatives to the mostly used industrial fats, for applications in product formulation. Fatty acid (FA) and triacylglycerol composition, nutritional indexes, solid fat content (SFC), compatibility, consistency, melting, and crystallization profiles were determined. Soybean oil increased blends' unsaturated FA profile, leading to lower SFC, but higher nutritional quality. Fats' melting profiles were significantly altered with soybean oil addition: temperatures decreased with the increase in oil content. Iso-solids diagrams showed that lipids were compatible, which is a technological advantage. SFC and consistency profiles suggested that tucuma and murumuru fats could be used as hardstocks for lipid products, and bacuri fat could be applied in products such as margarine and spreads. Blends could improve fats' spreadability and other technological properties, which is promising for applications in products formulation.

A highly sensitive optical fiber sensor enables rapid triglycerides-specific detection and measurement at different temperatures using convolutional neural networks.

For specific recognition and sensitive detection of triglycerides (TGs), an optical fiber sensor (OFS) based on an enhanced core diameter mismatch was proposed. The sensitivity of the sensor is significantly increased due to the repetitive excitation of the higher-order cladding modes. A technique for immobilizing lipase using covalent binding technology was presented and demonstrated by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy. The interference dip of the sensor was shifted due to TGs being hydrolyzed in the presence of lipase. The sensor shows an optimal response within 3 min and exhibits a high sensitivity of 0.9933 nm/(mg/ml) and a limit of detection of 0.0822 mg/ml in the concentration range 0-8 mg/ml at a temperature of 37 °C and a pH of 7.4. The response of the sensor to TGs concentration at different temperatures and pH was investigated. The reproducibility, reusability, and stability of the proposed sensor were tested and verified experimentally. The biosensor is highly specific for TGs and unaffected by many other interfering substances. Further, the measurement of TGs concentration at different temperatures was realized. This method provides a new way to detect TGs rapidly and reliably and has potential applications in medical research and clinical diagnosis.

MCT Nanoemulsions for the Efficient Delivery of siRNA.

In this study, an oil-in-water (o/w) nanoemulsion is used to deliver siRNA targeting Twist1, a protein that contributes to tumor metastasis in a variety of cancers. The FDA-approved oil, medium chain triglycerides (MCT), is used as the hydrophobic phase for the nanoemulsion. The siRNA is paired with dioleoyl-3-trimethylammonium-propane (DOTAP) to form a hydrophobic salt that is soluble at high concentrations in MCT. The resulting MCT/siRNA-DOTAP solution is formulated into a nanoemulsion with an average particle size of 140 nm. The nanoemulsion displays long term stability over the course of 195 days. In an in vivo murine tumor model, the nanoemulsion facilitates a 46% decrease in Twist1 mRNA after 48 h.

Isotropic liquid state of cocoa butter.

The complex crystal structure of coca butter (CB) is responsible for the unique melting behavior, surface gloss, and mechanical properties of chocolate. While most studies concentrated on the crystalline state of CB, few studied the isotropic liquid state, which has a major impact on the crystallization process and the characteristics of the resulting crystals. In this study, the molecular organizations of the main CB triacylglycerols (TAGs; 1,3-dipalmitoyl-2-oleoylglycerol, palmitoyl-oleoyl-stearoylglycerol, POS, and 1,3-distearoyl-2-oleoylglycerol) were studied. The findings revealed the tunning-fork (Tf) conformation, commonly found in the crystalline state, is the least abundant in the isotropic liquid state of CB and pure TAGs. Notably, POS was found to interact with itself in CB, while its molecules with Tf conformation, although in small amounts in the mixture, tend to pair with each other at lower temperatures. These results highlight the significance of POS in CB crystallization and provide insights for developing CB alternatives.

Selective ionization of oxidized lipid species using different solvent additives in flow injection mass spectrometry.

Lipid oxidation in food products is a crucial problem that causes undesirable changes in the food's flavor, texture, and nutritional value. It should be carefully monitored as it can lead to the formation of potentially toxic compounds and in that way reduce the shelf life of the product. Liquid chromatography coupled to mass spectrometry is a powerful tool to monitor the formation of oxidized lipids. However, the presence of lipid species in both their non-oxidized and oxidized forms at distinctly different concentrations can hinder the detection and identification of the less abundant oxidized species, due to coelution. In this study, a flow injection mass spectrometry approach was used to selectively ionize oxidized triacylglycerols versus their non-oxidized precursors. Three mobile phase additives were investigated (ammonium formate, sodium acetate, and sodium iodide) at three different concentrations, and ion source settings (i.e., sheath gas temperature, capillary voltage, and nozzle voltage) were optimized. A fractional factorial design was conducted to examine not only the direct effect of the operating parameters on the selectivity of ionization for the oxidized lipid species, but also to assess their combined effect. Overall, selective ionization of oxidized versus non-oxidized lipid species was favored by the use of sodium-containing solvent additives. The application of specific ion source settings resulted in an increased ionization selectivity, with sheath gas temperature and capillary voltage having the most significant influence. A selectivity factor as high as 120 could be reached by combining 0.1 mg/mL sodium-containing additives, with 250 °C sheath gas temperature and 5000 V capillary voltage. These findings will contribute to future studies on fast detection and relative quantification of low abundant oxidized triacylglycerols and their possible impact on human health.

Effect of substrate composition on physicochemical properties of the medium-long-medium structured triacylglycerol.

BACKGROUND: Nutritional and functional qualities and applications of structured lipids (SL) depend on the composition and molecular structure of fatty acids in the glycerol backbone of triacylglycerol (TAG). However, the relationship between the substrate composition and physicochemical qualities of SL has not been revealed. The investigation aims to disclose the effect of substrate composition on the physicochemical properties of medium-long-medium structured lipids (MLM-SLs) by enzymatic interesterification of Lipozyme TLIM/RMIM. RESULTS: The medium-long-chain triacylglycerol (MLCT) yield could reach 70.32%, including 28.98% CaLCa (1,3-dioctonyl-2-linoleoyl glyceride) and 24.34% CaOCa (1,3-didecanoyl-2-oleoyl glyceride). The sn-2 unsaturated fatty acid composition mainly depended on long-chain triacylglycerol (LCT) in the substrate. The increased carbon chain length and double bond in triacylglycerol decreased its melting and crystallization temperature. The balanced substrate composition of MCT/LCT increased the size and finer crystals. Molecular docking simulation revealed that the MLCT molecule mainly interacted with the catalytic triplets of Lipozyme TLIM (Arg81-Ser83-Arg84) and the Lipozyme RMIM (Tyr183-Thr226-Arg262) by OH bond. The oxygen atom of the ester on the MLCT molecule was primarily bound to the hydrogen of hydroxyl and amino groups on the binding sites of Lipozyme TLIM/RMIM. The intermolecular interplay between MLCT and Lipozyme RMIM is more stable than Lipozyme TLIM due to the formation of lower binding affinity energy. CONCLUSION: This research clarifies the interaction mechanism between MLCT molecules and lipases, and provides an in-depth understanding of the relationship between substrate composition, molecular structure and physicochemical property of MLM-SLs. © 2023 Society of Chemical Industry.

Detection and analysis of triacylglycerol regioisomers via electron activated dissociation (EAD) tandem mass spectrometry.

Triacylglycerols (TGs) are important components of human diet. The positional distribution of fatty acids (FAs) on the glycerol backbone affects the chemistry and physical properties of fats. Especially for infants, the structure of TGs plays an important role in the growth and development. However, limited by detecting technology, accurately identifying regioisomers of ABA/AAB and BAC/ABC/ACB type TGs is a significant challenge for human milk utilization and the development of infant formula. For this, we exploit a novel method for identifying the regioisomers of ABA/AAB and BAC/ABC/ACB type TGs within complex lipid mixtures, via used electron activated dissociation (EAD) tandem mass spectrometry. The distribution information of acyl chains at the sn-2 and sn-1/3 positions of glycerol backbone and double bonds in unsaturated FAs can be easily obtained by fragmenting TG ions with energetic electrons (15 eV). Then, the standard curve was established by correlating the peak area intensity of sn-2 characteristic product ion with the content of TG regioisomers standard. These analytical methods successfully enabled the identification and quantification of TG regioisomers in human milk, cow milk, infant formula, palm oil, and sunflower oil. Additionally, the distribution of the double-bond positions of unsaturated FAs in these samples was also identified. Compared to traditional methods, this approach eliminates the need for complex processing and analysis procedures, enabling rapid structural characterization of ABA/AAB and BAC/ABC/ACB type TGs within 17 min. Hence, we provide a rapid and convenient methodology for detecting and analyzing ABA/AAB and BAC/ABC/ACB type TG regioisomers, thereby offering valuable assistance in the development of specialized formulations and facilitating effective process control for ensuring the quality of edible oils and fats.

Mechanisms of interesterified fat digestibility in a muffin matrix using a dynamic gastric model.

Industrially generated trans-fats have been linked with cardiovascular disease (CVD) and have thus been replaced by interesterified (IE) fats, in foods. Interesterification rearranges fatty acids on the glycerol backbone of a triacylglycerol molecule. However, the impact of IE fat on health is unknown. We recently reported differences in lipid absorption kinetics between IE and rapeseed oil (RO). Here, we investigated the mechanisms underpinning IE fat digestion kinetics in the same muffins baked using an IE fat, non-IE fat [with the same fatty acid composition] and rapeseed oil (RO) under simulated conditions. IE and non-IE fats were largely solid in the gastric phase and strongly associated within the muffin matrix, whereas RO formed liquid droplets which separated from the matrix. No significant difference in lipolysis rates was detected between IE and non-IE fats. The lipolysis of the RO fat was slower, due to long-chain PUFAs. Interesterification itself did not affect digestibility, but the strong interaction between the hard fats and the muffin matrix resulted in extensive creaming of the matrix in the stomach, leading to delayed gastric emptying compared to the RO sample. The rate and extent of lipolysis were determined by the amount of fat available and the structure of the fat. This demonstrates the importance of the physical behaviour of the fats during digestion and provides a mechanistic understanding of the overall lipid digestion of IE fats, which relates to their physiological response.